I have a limited qty of the API AEM Infinity standalone Plug N Play systems for the XP1K and XP900. These are private labeled units from API which is no longer in business. They come with FULL warranty and are new in sealed boxes. Please note the part number (30-3811-PDI) as it will show you that these were produced for PDI (parent company of API). $1250 for limited time.
The Infinity ECU for Polaris RZR XP 1000 (Infinity 508 PN 30-7112, ECU pictured is for XP900 PN 36-7108) includes an engine-specific start-up calibration and connects to the engine via a Plug & Play harness that is included (PN 30-3811).
Complete Stand Alone Engine Control
When combined with AEMs Plug & Play Adapter Harness, the Infinity completely replaces the factory ECU and installs quickly using all supplied hardware and sensors. A base map for the engine is included to speed up the tuning process.
Tune it Once for Sea Level and Altitude
The Infinitys VE-based tuning model ensures one-time tuning for all altitudes. It can be tuned at sea level and driven to high altitudes without the need to make adjustments to the tuning calibration.
Complete Plug & Play Systems for All RZR Models
A MAP sensor, AIT sensor, wideband AFR sensor and ignition coil driver are included in each Plug & Play RZR kit to ensure quick installation. Connections for the factory sensors are included on each Plug & Play wiring harness. The Infinity ECU supports the factory injectors and injector upgrades through the Wizard in the software. Drive-by-Wire is supported on RZR XP models and boost control with aftermarket turbo systems (boost control solenoid PN 30-2400 recommended, sold separately).
Full Dashboard Functionality
The Infinity ECU integrates with the RZRs CANbus system to retain full dashboard functionality on each vehicle.
AWD Control is Fully Supported
AWD control is supported through the Infinity ECU to retain the RZRs formidable off road capabilities.
Closed-Loop Wideband Feedback Control
The Infinity ECU includes an on-board UEGO wideband air/fuel ratio (AFR) controller. A Bosch 4.2LSU UEGO sensor (PN 30-2001) is included with each Plug & Play kit.
Plug & Play Harness with Expansion Port
AEMs sealed, weatherproof Plug & Play harness for Polaris RZRs includes an AEMnet port for communication with other AEMnet enabled devices.
An expansion port with a weatherproof 12-pin connector is included in the Plug & Play Adapter Harness for adding common aftermarket sensors including fuel and/or oil pressure (30-2130-150 150 PSI) and ethanol content (ethanol content sensor PN 30-2200 sold separately). The expansion port also includes a sensor ground, 5v reference, power from relay and switched inputs for boost target, etc.
(Please note: The part # on the ECU box is for the XP900, not the 1K. I have both, just didn't want to open another box).
Email or call now to get yours while you can. $1265 Shipped to your door.
Matt@gonxsdesigns.com or 559-312-6312.
